Objecto H5 - Page 9

9
English
Setting the mist level1.
To set the mist level, press the Mist Setting button
. Each time the button is
pressed, the setting cycles from L (Low) → SL (Min.) → H (High). The indicator is lit
blue when set to H (High), lit orange when set to L (Low), and flashes orange when
set to SL (Min.).
H (High) → L (Low) → SL (Min)
Mist setting Indicator color
H (High) Blue
L (Low) Orange
SL (Min.) Flashes orange
Setting the timer2.
To set the timer, press the Timer Setting button
. Each time the button is
pressed, the setting cycles from 2H (off after 2 hrs.) → 4H (off after 4 hrs.) → CONT.
(continuous operation). The indicator is lit orange when set to 2H flashes orange
when set to 4H and is not lit when set to CONT. (continuous operation).
CONT. (continuous operation) → 2H (off after 2 hrs.) → 4H (off after 4 hrs.)
Timer setting Indicator color
CONT. (continuous operation) Off (no color)
2H Orange
4H Flashes orange
If the Power/Water indicator (P/E) turns red during operation, it indicates that the
water level in the water tank is low.
When the water level in the water tank is low, the alarm beeps five times and the
Power/Water indicator (P/E) lights up red.
After draining any remaining water in the tank, refill the water tank with new tap water.1
When water reaches the humidifier from the water tank, the Power/Water indicator (P/E) 2
turns off.
Press the Power button 3
to start operation.
CAUTION
If water needs to be refilled, the alarm beeps five times, and the Power/Water
indicator (P/E) lights up red. Refill the water tank.
03-0MOD-KH1203USH5H5.indb903-0MOD-KH1203USH5H5.indb9 2013/11/0821:28:142013/11/0821:28:14