Quick Start Guide
Install side brushes
Tidy the room
1
2
Bluetooth matching
4
Remove the retainerRemove the protection barPeel o the protection film
Self-emptying
base and robot
preparation
Prior to use, put in order furniture including tables and
chairs, as well as floor fans and other objects, and gather
weighing scales, wires and other lower objects in order
for maximum cleaning space. Do not use the mopping
function on floor carpets.
0.5m
0.5m
1.5m
0.5m
Press and hold down the " "
button for 3 seconds until a beep
is heard. The " " indicator light
should start to flicker. Follow
instructions on app for next steps.
Put extra power cords
in their storage slot
Briefly press it for 1 second
to start/pause
Fill the tank with
water
Water inlet/outlet
Press " " for 3 seconds, the
machine automatically matches
with the self-emptying base after
turning on, and then machine plays
the "beep" prompt.
Place the self-emptying base
3
Network pairing
5
Start to clean
6
For quick guide of using APP, please refer to “Recommended steps to use APP.”
Notes
To Next Page
Loading...
Need help?
General