Ocean Matrix OMX-HDMI-2-IP Configuration & Troubleshooting Tips

OMX-HDMI-2-IP
HDMI Over IP Extender/HDMI to CAT5/CAT6 Converter
Supports up to 8 Receivers
CONFIGURATION & TROUBLESHOOTING TIPS
Step 1 Connect source to transmitter with an HDMI cable
Step 2 Connect transmitter to receiver with a Cat5/6e cable
Step 3 Connect receiver to display with an HDMI cable
Step 4 Play video from source.
Point to Point
 HDCP Support: HDCP1.2
 Max Transmission Rate: 10.2Gbps
 Network Bandwidth Utilized: 80Mbs
 Audio Signal Format: L/R Stereo Audio
 TMDS Signal: 0.5-1.5Vp-p (TMDS)
 DDC Signal: 5Vp-p(TTL)
 Twisted Pair Interface: Cat5e/6
 Cabling Standards: TIA/EIA568 B
 Power Supply: 5VDC/1A
 Power Consumption: <3.6W
HDMI Resolutions
Input
480i@60Hz; 480p@60Hz; 576i@50Hz; 576p@50Hz;
720p@50/60Hz; 1080i@50/60Hz; 1080p@50/60Hz;
Output
480p@60Hz; 576p@50Hz; 720p@50/60Hz; 1080p@50/60Hz
Video Color Formats
24 Bit/Deep color
30 Bit/Deep color
36 Bit Deep Color
Transmission Distance
Cat6 up to 394 ft/120m
Cat5e up to 328 ft/100m
Cat5 up to 262 ft/80m
Input/Output Cable Length
16 ft / 5m (AWG26 HDMI1.3 standard cable)
SPECIFICATIONS
Note: Cannot be used for extending non-HDCP-encrypted signal.

Ocean Matrix OMX-HDMI-2-IP Specifications

General

Brand	Ocean Matrix
Model	OMX-HDMI-2-IP
Category	Extender
Language	English