Octave CAT User Manual

Details the main electronic parts of the synthesizer, including oscillators, noise source, and filter.

Explains the principle of voltage control in synthesizers and its application to various modules.

Details modifications to ADSR triggering for polyphonic use and its impact on transient generation.

Procedure for tuning the VCOs for unison and intervals, including warm-up requirements.

Guidance on setting up patches using provided charts and ear, with emphasis on control settings.

Details high and low level audio output specifications for the synthesizer.

Details stereo cable connections for master/slave unit synchronization.

Information on connecting and using an external pedal for filter cutoff modulation.

Specifications for connecting external audio signals into the synthesizer.

Defines Attack, Decay, Sustain, and Release time parameters for transient generators.

Defines frequency range and wave outputs for the Low Frequency Oscillator.