Need help?Do you have a question about the Odyssey Stratos and is the answer not in the manual?
Do not operate the unit without the outer casework to avoid serious injuries from internal voltages.
Only replace fuses with the same type and ratings. Do not bypass any fuse.
Use the provided three-prong plug and ensure extension cords have at least 10 amps.
Do not attempt self-repair. Contact Odyssey Designs or distributor for servicing.
Connect the supplied AC power cord, ensuring it is properly grounded. Do not defeat the grounding pin.
Turn off the unit before connecting or disconnecting input/output wires to prevent damage.
Connect RCA cables to input connectors and speaker cables to binding posts.
Connect to Left/Right input jacks. Mono versions accept one channel signal. Keep channel order.
Leave units on at all times until break-in is complete for enhanced sonic performance.
Details four distinct phases of performance improvement during the break-in process.
Best sonic performance is achieved when components are kept fully charged at all times.
Position speakers for optimal sound, minimizing reflections from side walls and windows.
Check power connection, wire connections, other components, and external fuses.
Turn off unit, disconnect power, open cover, and check internal fuses. Recommend technician for tasks.
If issues persist, contact your Odyssey distributor or them directly for phone support.
Warrants unit free from manufacturing defects for 20 years from purchase date.
Details conditions like registration, proper use, authorized repairs, and defect description.
This warranty expires 20 years after the date of purchase.
Divides warranty into two periods: Years 1-2 full coverage, Years 3-20 limited (parts covered, labor extra).
Provides contact address for Odyssey Designs AV, Inc. for warranty inquiries and service.
To Next Page
General