7. To set PERIOD:
• Press PERIOD.
• Enter value on the numeric keypad.
Press ENTER.
• Will auto-increment when setting time at end of
period.
8. To set
SCORES:
• Press HOME OR GUEST SCORE.
• Enter score on numeric keypad. Press ENTER.
NOTE: To Increment SCORES or PERIOD, press desired
function button, then Press +1.
9. To set SHOTS ON GOAL (IF ENABLED):
• Press HOME SHOTS or GUEST SHOTS.
• Enter value on numeric keypad. Press ENTER.
NOTE: With the game time running, increment SHOTS by
pressing appropriate teams SHOTS button.
10. To set PLAY TIMER (IF ENABLED)
:
• Ensure Start/Stop switch is in STOP position.
• Press PLAY TIMER SET.
• Enter “shot clock” length on the numeric keypad.
Press ENTER.
NOTE: If PLAY TIMER is enabled, but not required – set play
timer to 0, to disable it.
11. To RE-SET PLAY TIMER (IF ENABLED)
:
• Press PLAY TIMER RESET.
• if equipped, Press external button
12. To
CLEAR any value:
• Press any function button to move the flashing
cursor over a desired value. Then Press CLEAR.
13. To set
SHIFT TIMER (IF ENABLED):
NOTE: The SHIFT TIMER counts down from the set amount.
When the SHIFT TIMER is expired a one second horn will sound,
then the SHIFT TIMER will reset and start counting down again.
• Press SHIFT.
• Enter the shift time settings in minutes using the
numeric keypad.
Press ENTER.
• To edit the current running shift time Press SHIFT.
Then
SHIFT again. Enter the minutes using the
numeric keypad.Press ENTER.Enter the seconds
using the numeric keypad.Press ENTER.
NOTE: On power up, the shift time will be 0:00, which leaves it in
an inactive mode which means no horns will sound.
14. To set CLOCK DIRECTION
• Press the TIMER UP/DOWN button.
• This will toggle between
UP and DOWN. If UP
is selected, press ENTER.
• Then, enter time limit using the numeric
keypad, and press
ENTER, again.