Ognibene STA - User Manual

Lists specific tools and codes required for maintenance and assembly procedures.

Covers initial steps like removing covers, shafts, seals, and bearings from the main unit.

Details disassembly of anti-shock valves and relief valves for specific models.

Outlines cleaning parts with solvent and lubricating them for assembly.

Details spool, sleeve, bearing, and basic unit reassembly steps.

Covers assembly of suction valves, gerotor, end cover, and specific valves.

Details torque values for various oil port sizes and washer types.

Specifies torque values for different types of installation screws.

Lists all matrix components with part numbers and quantities for different models.

Details components based on steering unit displacement (CC).

Lists common operational errors and their probable causes.

Provides recommended actions to resolve identified errors.

Lists conditions that must be met before diagnosing errors.

Provides instructions on clean conditions, scale removal, and port orientation.

Details connecting pipes, ensuring tightness, and filling the tank.

Steps for initial startup, venting the circuit, and checking oil levels.

Specifies recommended oil types, viscosity, and operating temperatures.

Details filtration standards and magnetic insert recommendations.

Outlines conditions for warranty repairs.

Disclaimer regarding responsibility for errors in documentation.