OHAUS RS232 Interface - Page 6

EN-4 RS232 Interface
For PJX Balances:
Menu Navigation
PRINT
Header
Date and Time
Balance ID
Balance Name
User Name
Project Name
Application Name
Result
Gross Weight
Net Weight
Tare Weight
Line Feed
RS232
Baud Rate
Transmission
Handshake
Menu Settings
RS232 Interface Setup
--Baud Rate
--Transmission
--Handshake
Enter this sub-menu to customize RS232 standard settings.
Data may be output to either a printer or a PC.
Set the baud rate (bits per second).
1200 = 1200 bps
2400 = 2400 bps
4800 = 4800 bps
9600 = 9600 bps
19200 = 19200 bps
38400 = 38400 bps
Set the data bits, stop bit, and parity.
8-N-1 = 8 data bits, no parity, stop bit 1
8-N-2 = 8 data bits, no parity, stop bit 2
7-E-1 = 7 data bits, even parity, stop bit 1
7-E-2 = 7 data bits, even parity, stop bit 2
7-N-1 = 7 data bits, no parity, stop bit 1
7-N-2 = 7 data bits, no parity, stop bit 2
7-O-1 = 7 data bits, odd parity, stop bit 1
7-O-2 = 7 data bits, odd parity, stop bit 2
Set the flow control method.
NONE = no handshaking
XON-XOFF = XON/XOFF handshaking
HARDWARE = hardware handshaking
Print Settings
For more info, please refer to the PJX instruction manual.