OHTAKE NJ Series User Manual

NSIR MAE01
Read these instructions for the proper use of this machine.
After having read these instructions, keep them in a convenient place so you
or the operator can refer to them whenever necessary.
Operation Manual
ＱＵＩＣＨＥＲ
ＮＳＲＩ Type
Automatic Screw Feeder
ὀព㸟㸸www.ohtake-root.co.jp ࡀᙜ♫၏୍ࡢ HP ࢔ࢻࣞࢫ࡛ࡍࠋ
ᘢ♫ࡢྡࢆ㦄ࡿഇࢧ࢖ࢺ࡟ࡈὀពୗࡉ࠸ࠋ⌧ᅾࠊᙜ♫ࡣ୰ᅜᅜෆ࡟ᨭᗑࡣࡈࡊ࠸ࡲࡏࢇࠋ
ྛ఩栦ᐈ実ὀព㸸ࠕwww.ohtake-root.co.jp 󰩾ᩎྖ၏୍ⓗᐁ᪉⨒❰㸪
┠๓㸪ᩎྖᅾ୰ᅜἐ᭷≆஦⢬୚ᡤ宻ⓗ୰ᅜᐁ⨒ࠋࠖ
ATTENTION : www.ohtake-root.co.jp is the only web site associated with our company.
 We do not have any branches in China.
OPTION COUNTER
Operation Manual
Read these instructions for the proper use of this machine.
After having read these instructions,
keep them in a convenient place so you
or the operator can refer to them whenever necessary.
自動ネジ供給機
NJ/NSB
Series
Automatic Screw Feeder
NJC1MA01
a

OHTAKE NJ Series Specifications

General

Type	Industrial Equipment
Category	Industrial Equipment
Manufacturer	OHTAKE
Model	NJ Series
Series	NJ

Summary

OUTLINE

Grounding Requirement

Connect the unit to ground before use to prevent static electricity malfunction.

OPERATION

Screw Feeding Process

Explains how the counter decrements and indicates completion when screws are picked up.

Number Adjustment Procedure

Describes how to correct count errors using the NO COUNT button when a screw is not counted.

LCD COUNTER

LCD Panel Description

Details the functions of the SET field, SET TOTAL field, LED indicator, and setting buttons on the LCD panel.

Panel Settings Before Screw Feeding

Setting Desired Screw Count (PRESET)

Explains how to set or change the desired screw count using the PRESET buttons.

Adjusting Sound Volume (VOLUME SET)

Describes how to adjust the buzzer volume using the VOLUME SET buttons.

Panel Settings During Screw Feeding

Resetting Current Set Count (RESET)

Details how to reset the current set count while screw feeding is active.

Clearing Total Count (CLEAR)

Explains how to reset the SET TOTAL count to '0000' using the CLEAR button.

Correcting Pick-up Failure (NO COUNT)

Describes how to cancel a count in case of pick-up failures or dropped screws.