www.okinternational.com - 38 - P/N 7000-1370, Revision B
UBS-APR Under Board Support APR-5000
VNZ-ORINGK VNZ Pipette O-Ring Kit
APR-5AK APR-5000 Accessory Kit
APR-VA External Video Adaptor, USB
VII. CALIBRATION KIT & SPARE PARTS:
Listed below are the calibration kit and spare parts that are available for your APR-5000 Rework
System.
Parts
APR-CALKIT APR-5000 Calibration Kit
APR-AH APR-5000 Air Hose Kit
APR-VF APR Vacuum Filter
APR-HHA APR-Heater Head Assembly
APR-HCA APR-5000 Head Cover Assembly
APR-CL APR Camera Lamp (Top & Bottom)
APR-CA APR Camera Assembly
APR-PCGC APR Protective Camera Glass Cover
APR-AS APR Air Solenoid (for solenoid 1-4 )
APR-VPC APR Vacuum Pump/Compressor
APR-LCPCB APR Logic Control PCB
APR-ACPCB APR AC PCB
APR-MC APR Motor Control
APR-PHK APR-5000 Pre-Heater Kit, 115/220 VAC
APR-PHO APR-5000 Pre-Heater O-rings
APR-PHB APR-5000 Pre-Heater Blower
APR-HHP APR-5000 Heater Head Pump
APR-ALRWH APR-5000 Arm Lock Retractable Wire Harness
APR-ABK APR-5000 Action Button Kit
APR-PHRTD APR-5000 Pre-Heater RTD
APR-XAA APR-5000 X-Axis Assembly
APR-VPUK APR-5000 Vacuum Pick-Up Kit
APR-XALSK APR-5000 X-Axis Lock Solenoid Kit
APR-CF APR-5000 Cooling Fan
APR-YALSK APR-5000 Y-Axis Lock Solenoid Kit
APR-THK APR-5000 Table Hardware Kit
APR-YAK APR-5000 Y-Axis Kit
VIII. SITE PREPARATION
Solder Removal:
Prepare the site to receive a new component by removing all of the residual solder. This
can be accomplished by using an MX-500 Series Rework System with blade cartridge
assembly. Employing OK International Smart Heat™ Technology into your rework
process will virtually eliminate the potential of accidentally removing any pads when
removing residual solder. This is because OK International patented Smart Heat™
technology ensures that tip temperature is constantly maintained, regardless of the
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...