43827101TH Rev.2 105 /
Oki Data CONFIDENTIAL
B 43301501 Guide-Assy.-Eject-L
Shaft-Assy.-Eject(FD)
Guide-Eject-Upper
Shaft-Assy.-Eject(FU)
EM-30L Class C
EM-30L Class C
EM-30L Class C
EM-30L Class D
EM-30L Class A
part Y part X
Apply MOLYKOTE (EM-30L) in a normal quantity to the gear
tooth flanks, shaft surfaces and flanges (6 points).
Grease must not stick to the paper paths.
Apply MOLYKOTE (EM-30L) in a normal
quantity to the bearings (2 points).
Apply MOLYKOTE (EM-30L) in a normal
quantity to the post surfaces
(parts having the shaft inserted).
Detail of part Y Detail of part X
Grease must not stick to the hatched parts,
which compose the paper path.
Apply MOLYKOTE (EM-30L) in a normal
quantity to the shaft surfaces (6 points).
Grease must not stick to the paper paths.
Apply MOLYKOTE (EM-30L) in a normal
quantity to the tooth flanks of each gear (3 points).
To Next Page
Loading...
