45 – C610/C711 User’s Guide
PCL Setup
(cont.)
White Page
Skip
On/Off Sets whether to eject a page
without any data to print (blank
page) upon reception of FF
command (OCH) in PCL Mode.
OFF: Ejecting.
CR Function CR/CR+LF Sets action when CR code is
received in PCL.
CR: Carriage Return
CR+LF: Carriage Return and Line
Feed
LF Function LF/LF+CR Sets action when LF code is
received in PCL.
LF: Line Feed
LF+CR: Line Feed and Carriage
Return
Print Margin Normal
1/5 inch
1/6 inch
Sets a non-printable area of
paper.
The width of the area along the
right and left sides of paper (left
and right sides depend on paper
orientation).
NORMAL: PCL emulation
compatible, approximately 1/
4~1/4.3INCH (depending on
paper) is outside the printable
area.
True
Black
On/Off Sets whether to use Composite
Black (CMYK mixed) or Pure
Black (K only) for the black
(100%) in image data.
OFF: Mode using Composite
Black
ON: Mode using Pure Black
(PCL only)
ITEM SETTINGS EXPLANATION
To Next Page
Loading...
