Oki C911 - Page 62

沖データ企業秘密・OkiDataCONFIDENTIAL 
45530603TX - 62/130
Category1 Category2 Item Value
Defaul
t
Function / Notes Valid
Letter[SEF]
Letter[LEF]
Executive
16K(184x260mm)[SEF]
16K(195x270mm)[SEF]
16K(197x273mm)[SEF]
16K(184x260mm)[LEF]
16K(195x270mm)[LEF]
16K(197x273mm)[LEF]
8K(260x368mm)
8K(270x390mm)
8K(273x394mm)
Hagaki
Oufuku Hagaki
A4Wide[SEF]
A4Wide[LEF]
Custom
System Serial Number xxxxxxxxxxxxxxxxxxxxxxxxxx Displays the serial number of the printer.
The PU serial number is
displayed. (The PU serial number is stored in
EEPROM of PU and used for PPT [Page Printer Tracing System] and
so on. Only the PU serial number can specify a machine in ODC.)
"xxx..." in the Value column is an alphanumeric consists of up to 26
characters.
【Conditions for display】
Displays only when a serial number was registered by a PJL
command related to a serial number.
Asset Number xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Displays the Asset Number.
The Asset Number is thirty-two alphanumeric characters that can be
assigned by a user for managing the printer.
"xxx..." in the Value column is an alphanumeric consists of up to 32
characters.
【Conditions for display】
Displays only when an asset number was registered by a PJL
command related to a serial number.
Lot Number xxxxxxxxxxxxxxxxxxxxxxxxxx Displays the Lot Number.
This is a number displayed outside as a region number.
Either a PU serial number (a serial number stored in EEPROM of PU)
or a CU serial number (a serial number stored in EEPROM of CU) is
to be displayed.
"xxx..." in the Value column is an alphanumeric consists of up to 26
characters.
【Conditions for display】
Displays only when a serial number was registered by a PJL
command related to a serial number.
Firmware Version xxx.xx_x_x Displays the version number of FirmSuite.
This version is identical with that of "FW:xxx.xx_x_x" of Menu Map.
CU Version xx.xx Displays the version number of CU (Control Unit) firmware.
This version is identical with that of "CU version" of Menu Map.
PU Version xx.xx.xx Displays the version number of PU (Print Unit) firmware.
This version is identical with that of "PU version" of Menu Map.
RAM xxMB Displays the total size of all the RAM installed in the printer.
Flash Memory xxMB [Fxx]
Displays the total size of all the Flash Memory installed in the printer.
Also the version of the file system used in Flash Memory is displayed
together.
HDD xx.xxGB [Fxx] Displays the HDD size.
Also the version of the file system used in the HDD is displayed
together.
"uninstalled" is displayed if no HDD is installed.
Date and Time yyyy/mm/dd hh:mm
mm/dd/yyyy hh:mm
dd/mm/yyyy hh:mm
*JP
*ODA
*OEL
Indicates the current date and time.
The date is display in the format according to the setting of “Admin
Setup” -> “Time Setup” -> “Date Format.”
Print
Information
Configuration Execute Prints the configuration details of the print server. ET
Network Execute Prints general information on the network (only when a NIC is
installed).
【Conditions for display】
A Network FW is installed.
ET
Demo Page DEMO1
…
Execute
Prints a demo page. A demo pattern normally installed is one type,
and only Demo 1 is displayed. Multiple demo patterns are
displayed if provided. 32 demo data can be stored max. For OEM
configuration, the items is not displayed unless otherwise a demo
pattern has not been stored.
ET
File List Execute Prints a job file list. ET
PS Font List Execute Prints a font list of installed PostScript. ET
PCL Font List Execute Prints a font list of installed PCL emulation. ET
IBM PPR Font List Execute Prints a font list of IBMPPR. ET
EPSON FX Font List Execute Prints a font list of EPSON FX. ET
Usage Report Execute Prints the total of JobLog.
When select "Execute", "Copies" is displayed and the number of
pages to print can be specified.
[Condition for display]
・ "Enable" is selected for "Print Statistics"-"Usage Report."
ET
Error Log Execute Prints an error log. ET
Color Profile List Execute Prints a color profile list. ET
User Media List Execute Prints the user media list information.
[Conditions for display]
There is a registered user media .
ET
Test Print-1 Execute Prints the analytical pattern for print quality.
* A pattern stored in File System (Flash or HDD) can replace the
default pattern.
ET
Test Print-2 Execute Prints the analytical pattern for print quality.
* A pattern stored in File System (Flash or HDD) can replace the
default pattern.
ET
Test Print-3 Execute Prints the pattern for checking the reduction condition of the two-
pass
printing medium.
* A pattern stored in File System (Flash or HDD) can replace the
default pattern.
[Conditions for display]
.Five color printer and White is selected in [Admin Setup]-[Color
Setup]-[Spot Color].
ET
Test Print-4 Execute Prints the analytical pattern for print quality. (Spot Color)
* A pattern stored in File System (Flash or HDD) can replace the
ET