Network configuration > 21
Maintenance Tab
ITEM COMMENTS
LAN Scale Select NORMAL (the default) or SMALL.
Note: For small scale networks (with no routing), choose the
SMALL setting. For more complex networks choose
NORMAL.
IP Filter Setup… The following items can be configured:
Use IP FIlter Enable/disable IP Filtering. Default is
disabled.
Admin IP
Address
Set the administrator IP address.
IP Address
Range
Set up to 10 IP Filter address ranges: IP
Filter Range 1 through IP Filter
Range 10.
Printing Enable/disable printing of the specified
IP address range. Default is disabled.
Configuration Enable/disable changing IP address
ranges. Default is disabled.
Service… The following features can be selected by clicking their check
box.
Use TCP/IP Protocol
Use NetBEUI Protocol
Use NetBIOS over TCP
Use NetWare Protocol
Use EtherTalk Protocol
Use FTP Service
Use Telnet Service
Use Web Service
Use IPP Service
Use SNMP Service
Use SMTP Transmit
Use POP3 Protocol
Use SNTP
Use encrypted communication for configuration data