Network configuration > 12
D
EVICE
SETUP
Device Setup allows you to configure the network interface. Type the admin password
(default value is aaaaaa) to configure. Remember that the password is case sensitive.
Device Setup contains details for the following tabs:
> General
> TCP/IP
> NetWare
> EtherTalk
> NetBEUI/NetBIOS
> SNMP
> E-Mail(Send)
> E-Mail(Receive)
> SNTP
> Maintenance
> SSL/TLS
> IEEE 802.1x
The following section explains each tab’s functionality.
General Tab
This allows you to set or change the root password used for Admin Manager, TELNET and
FTP.
NOTE
Not all utilities, features or protocols are supported by every product. Please
check with your support website for latest information.
ITEM EXPLANATION
Change root
password
You can set/change the root password for
AdminManager, TELNET and FTP.
To Next Page
Loading...
