Oki ML1120 - Page 67

Technical Reference Guide – Operator interface > 67
Bottom feed
menu
Skip Over
Perforation
Select whether
to skip over
perforation or
not. (When a
skip over
perforation
setup command
is received, the
received
command is
given priority.)
Yes (25.4 mm/1 in)
No
Page Length Select the length
of a continuous
form.
279.4 mm (11 in)
296.3 mm (11 2/3 in)
304.8 mm (12 in)
355.6 mm (14 in)
431.8 mm (17 in)
76.2 mm (3 in)
82.6 mm (3.25 in)
84.7 mm (10/3 in)
88.9 mm (3.5 in)
93.1 mm (11/3 in)
101.6 mm (4 in)
127.0 mm (5 in)
139.7 mm (5.5 in)
152.4 mm (6 in)
177.8 mm (7 in)
203.2 mm (8 in)
215.9 mm (8.5 in)
Top feed
menu
Line Spacing Select line feed
pitch.
6 LPI
8 LPI
MENU ITEM FUNCTION SETTING