Oki Data CONFIDENTIAL
44871001TH Rev.6
10-14
10. APPENDIX
10.2.3.3.2 Guard-Connector, Connector (9715S-08Z02-G4C)
(1) Remove the two screws . Remove the two nuts .
(2) Disconnect the cable, and remove Guard-Connector
and Connector
(9715S-08Z02-G4C) .
(3) Installing is performed by the inverse procedure with removing.
(Note on removing / installing)
1. Be careful not to lose the nuts
.
④
②
③
Cable
To Next Page
Loading...
