Oki Data CONFIDENTIAL
44871001TH Rev.6
10-16
10. APPENDIX
10.2.3.3.4 CONN Cord-AMP8P-AMP8P
(1) Remove the Guard-Connector . (Refer to 3.3.2)
(2) Remove the Cover-Rear, Cover-Blind-R/L, Plate-Top. (Refer to 3.3.3)
(3) Remove CONN-Cord-AMP8P-AMP8P
from Board-GOG.
(4) Installing is performed by the inverse procedure with removing.
Board-GOG
②
①
10.2.3.3.5 Gear-Assy-Clatch (Hop, Regist), Motor-Pulse
(1) Remove the Cover-Rear, Cover-Blind-R/L, Plate-Top. (Refer to 3.3.3)
(2) Remove the two screws (Black)
, disengage the two tabs, and remove Cover-
Front .
②
①
①
To Next Page
Loading...
