Oki Pro1040 - Specifications; Major Specifications

- 102 -
Specifications
⿟
Specications
Major Specifications
Model Number Pro1040: N36200A, N36200B
Pro1050: N36201A, N36201B
RAM (standard/maximum) 2GB/2GB
Weight Pro1040: Approx. 61 kg (including unwinder)
Pro1050: Approx. 62 kg (including unwinder)
Power N36200A, N36201A : 110 - 127 VAC (Range 99 - 140 VAC), 50/60 Hz ± 2%
N36200B, N36201B : 220 - 240 VAC (Range 198 - 264 VAC), 50/60 Hz ± 2%
Power consumption When operating: Maximum 1200 W/Average 710 W
In standby: Average 27 W
In power conservation modes
Power save mode: 25 W or less
Auto power off: 1 W or less
Operating environment
Temperature: 10 to 30 °C, humidity: 20 to 70% RH
Maximum wet-bulb temperature is 25 °C (to assure high-quality full color
printing, temperature should be 17 to 27 °C, and humidity at 50 to 70% RH)
Network connections 1000BASE-T/100BASE-TX/10BASE-T
(Network Factory Defaults: 100BASE-TX/10BASE-T)
Local connections USB 2.0 interface (suitable for Hi-Speed USB)
Supported operating systems Windows 10/Windows 8.1/Windows 8/Windows 7/Windows Server 2016/
Windows Server 2012 R2/Windows Server 2012/Windows Server 2008 R2/
Windows Server 2008
Refer to the operating environment for details.
Printing method Pro1040: Full-color dry-type electrophotographic method using 4
consecutive digital LED heads
Pro1050: Full-color dry-type electrophotographic method using 5
consecutive digital LED heads
Printable width Paper width Roll paper: 25.4 mm (1 inch) - 130 mm (5.1 inches), including liner
Printable width Roll paper: 21.16 mm (0.83 inches) - 125.76 mm (4.95 inches)
Reference position Right edge facing feed direction
Resolution Print resolution 1200 × 1200 dpi (2-tone)/600 × 600 dpi (2-tone)
LED dot-pitch 1200dpi
Print colors Yellow, magenta, cyan, black, and white
*1
Print languages PCL5c, PCL6(PCLXL), PostScript
Print speed Color Pro1040 (CMYK) roll paper: 6 ips
Pro1050 (CMYK+W) roll paper: 6 ips
Media Type Standard Media, die-cut label paper
Feed capacity Roll diameter: 203.2 mm (8 inches)
Core size: 3 inches
Assured print range 2.12 mm from edge of paper. 2.12 mm from edge of label for label paper
Print accuracy
±0.5mmaccuracyatleadingedgeprintstartpoint(2σN
≧
20 When using
recommended media and recommended operating conditions
*4
)
±0.5 mm accuracy at right edge print start point (When using recommended
media and recommended operating conditions
*5
)
Image stretching: Less than 0.5% of length of paper (When using
recommended media and recommended operating conditions
*5
)
Warmup time Approx. (within) 50 seconds after turning power on (at room temperature of
25 °C and rated voltage)
*2