Oki Pro1040 - Page 38

- 38 -
Connecting to a PC
9
Press the scroll buttons
▲
and
▼
or
the numeric keypad to input the first
three digits of the IP address, and
then press the <OK> button. Use the
same operation to input the next three
digits. After input is complete, press the
<BACK> button.
To move to the next box, press the
<OK> button.
Note
z
The IP address in the screen is an example. Check
with your enterprise network administrator for the
value to actually input.
10
Press the scroll button
▼
to select
[Subnet Mask], and then press the
<OK> button.
11
Input the subnet mask the same way as
the IP address. After input is complete,
press the <BACK> button.
12
Press the scroll button
▼
to select
[Gateway Address], and then press the
<OK> button.
13
Input the gateway address the same
way as the IP address. After input is
complete, press the <BACK> button.
14
Press the <ON LINE> button to exit the
network setup.