- 40 -
Connecting to a PC
8
Input the IP address, subnet mask,
default gateway, and DNS server, and
then click [OK].
Memo
z
When obtaining an IP address automatically
from a DHCP server, select [Obtain an IP address
automatically] without inputting an IP address.
z
If a default gateway or DNS server is not to be
used, do not input its address.
9
Exit the “Ethernet Properties” screen.
To Install the Printer Driver
1
Check that the printer is connected to
the computer, and then turn on the
power.
Reference
z
"LAN Cable Connection" (P.34)
2
Insert the “Software DVD-ROM” into the
computer and click the DVD detection
message after it appears at the lower
right of the screen.
3
When the operation selection screen for
the DVD-ROM is displayed, click [Run
Setup.exe].
4
When the "User Account Control"
window is displayed, click [Yes].
5
Read the "Software License Agreement",
and then click [Accept].
To Next Page
Loading...
