Copyright (C) 2012 Oki Data Corporation
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
18 of 33
4.1.2 If the test page does not print
When using a Serial, USB, or LAN interface connection
Check the following.
Confirm that the paper has been correctly inserted in the printer.
Confirm that the top cover is closed.
Confirm that the interface cable is connected.
Confirm that the printer power is turned on.
(If it is already turned on, turn it off and on again.)
If the printer status is offline, use the follow procedures to bring the printer online.
How to check and set the printer online/offline status:
(1) Open the [Printer Folder].
* See the [Printer folder] procedure in "3.1 How to use this manual" for instructions on how to open
the screen in each OS.
(2) Perform the following steps for the OS you are using.
For Windows 7/Server 2008 R2
• Right-click the "PT330-331 Raster" printer in the printers and faxes section and then click [See
what's printing]. If the [Use Printer Offline] checkbox in [Printer] is selected, clear it.
For Windows Vista/Server 2008
• Right-click the "PT330-331 Raster" printer and then click [Run as administrator]. Click [Use
Printer Online] if it is displayed.
* Log on using an Administrator account, right-click the "PT330-331 Raster" printer, and then click
[Use Printer Online] if it is displayed.
For Windows XP/Server 2003/WEPOS/WEPOS 2009
• Right-click the "PT330-331 Raster" printer and then click [Use Printer Online] if it is displayed.
For Windows 2000
• Right-click the "PT330-331 Raster" printer and then clear the [Use Printer Offline] checkbox if it
is selected.
To Next Page
Loading...