Step 12
• Check for wobbles.
• In a sequential manner, gradually tighten all Bolts until evenly
secured.
• Inspect the Bed and make sure all parts are adequately connected
• With assistance from your adult partners, adjust the levellers to
desired height to avoid wobbles.
• To adjust the Levellers, get assistance from an adult partner to lift/
lean and hold the Bed while you are working.
Your Bed is ready for use.
**Please note: this Bed can only be used on a flat, level surface.
If additional help is needed in the assembly process, please
reach out to our customer support team at 1-833-OKIOKI1.
13
To Next Page
Loading...