8
Step 2
• Insert the Allen Wrench (5) to the Right Leg (B) and Left Leg (C) as
shown picture above
Step 3
• With assistance from your adult partners, carefully place the Head-
board(A) facedown on a clean, non-marring surface as shown above.
• Attach Right Leg (B) and Left Leg (C) ín step 2 to Headboard (A) and
First Support Bar (D) by using Crescent Nut (3), Washer (1) , Spring
Washer (2), Lock Nut (4), Allen Key (16)
• Do not fully tighten the Nuts.
To Next Page
Loading...