oklahoma joes CANYON COMBO 24203004 User Manual

52 pages

To Next Page

PN: 42805717 • 10/03/2023

Need Help? Visit Oklahomajoes.com for video assembly tips. If you’d rather - you can call us at 1-800-318-7744

Necesita ayuda? Visite Oklahomajoes.com para obtener consejos sobre el montaje de videos. Si preere, puede llamarnos al 1-800-318-7744

SERIAL NUMBER:

NÚMERO DE SERIE:

______________________________________

See rating label on grill for serial number.

El número de serie se encuentra en la etiqueta

deespecicaciones de la parrilla.

DATE PURCHASED:

FECHA DE COMPRA:

______________________________________

MODEL NUMBER

NUMÉRO DE MODÈLE

24203004

ASSEMBLY GUIDE

GUIA DE MONTAJE

Tools Needed for Assembly:

2 Adjustable Wrenches

Phillips Screwdriver

Herramientas necesarias para el armado:

2 Llaves regulables

Destornillador Phillips

Questions and Answers:

S
Sara DeanAug 7, 2025
What to do if my oklahoma joes CANYON COMBO 24203004 burner won't light with the ignitor?
- D
  Donald JonesAug 7, 2025
  If your Oklahoma Joes Smokers burner isn't lighting with the ignitor, there could be several reasons. First, check that the burner is correctly engaged with the regulator control valve. An obstruction in the burner can also prevent lighting, so inspect the burner tube for spider webs or other debris. If it's an electrical issue, the electrode may be cracked or wet, or the wires could be loose or covered in cooking residue. Try wiping the electrode dry, cleaning the wires with rubbing alcohol, or reconnecting any loose wires. If the electrode is cracked, it will need replacing. Also, ensure that your LP cylinder is not empty and is fully connected to the Regulator Control Valve.
S
Susan BennettAug 15, 2025
Why won't my oklahoma joes CANYON COMBO 24203004 Smokers burner light with the ignitor?
- K
  Kelly CurryAug 15, 2025
  There are several potential reasons why your Oklahoma Joes Smokers burner won't light with the ignitor. Possible gas issues include the burner not being engaged with the regulator control valve, an obstruction in the burner tube, no gas flow because the LP cylinder is empty, or the regulator control valve and LP cylinder valve not being fully connected. Electrical issues could involve a cracked or wet electrode, wires covered with cooking residue, or loose/disconnected wires. You may need to clean or replace some parts.