!!!SAFETY PRECAUTIONS!!!
-Since canning is likely to create a wet environment, make sure the flooring
around the seamer is non-slip.
-Always plug the seamer into a GFCI outlet to avoid shocking hazards.
-Pay attention to things like loose clothing, long hair, etc. The can and upper and
lower chucks will be spinning and can cause injury if anything gets wrapped
around them.
-Never reach into area around the upper chuck and rollers while operating. The
rollers can pinch or draw-in fingers and objects and cause injury.
-Never remove the top cover while operating. The spinning belt and motor will be
exposed and can cause injury.
-Never remove the switch enclosure box, or the motor connection panel while the
seamer is plugged in. There are open live connections inside each that risk a
shocking hazard.
-------------------------------------------------------------------------------------------------------------
POWER REQUIREMENTS
Short Circuit Current Rating:
120V: 220V:
Rated Frequency
120V: 60Hz 220V: 50Hz
Full Load Current
120V: 220V:
-------------------------------------------------------------------------------------------------------------
To Next Page
Loading...