Oldsmobile 1995 Aurora - Page 206

6. Connect the red positive (+) cable to the remote
positive
(+) terminal of the vehicle with the dead
battery.
7. Don’t let the other end touch metal. Connect it to the
positive
(+) terminal of the good battery. Use a
remote positive (+) terminal if the vehicle has one.
8. Now connect the black negative (-) cable to the good
battery’s negative
(-) terminal.
Don’t let the other end touch anything
until the next
step. The other end
of the negative cable cloesn P go
to the dead battery. It goes to a heavy unpainted
metal part on the engine
of the vehicle with the dead
battery.
5-6