4.
There's
a
temperature sensor
on
the corner
of
the air
cleaner cover. Use
a
screwdriver to release the
sensor's electrical connector retainer, and
pull
up.
5.
Unsnap the two clamps
by
pushing down on the top
of
the air cleaner cover and pushing
in
on the clamps
toward the center
of
the cover. Then remove the
cover.
A.
Remove the air filter.
7.
Install the new air filter and reverse
all
steps to
reinstall the cover. electrical wires, duct and clamp.
Be sure the
tabs
of
the air cleaner cover
fit
into the
slots
of
the air cleaner housing. Then make sure both
clamps are
f~~lly
engaged.
6-
15
To Next Page
Loading...
