1.
Check the vertical aim for each headlamp
and
adjust
it
as
necessary. Turn the vertical aiming screw
until
the
bubble
in
the level is centered at
0
(zero).
2.
Now acl-just the horizontal aim. Check the horizontal
aim for each headlamp and adjust
it
as necessary.
TLII-11 the horizontal aiming screw
until
the pointer is
lined
up
with
the
0
(zero).
3.
Now, re-check the vertical aim, to make sure
it
is
still correct after the horizontal aim adjustment.
Read.just.
if
necessary.
6-29
To Next Page
Loading...
