Cleaning Leather
Care
of
Safety Belts
1
i
I
saddle soap.
1
For stubborn stains, use a GM Vinylkeather Cleaner
Use a soft cloth with lukewarm water and a mild soap or
I
I
I
or equivalent product.
cleaners, furniture polish or shoe polish on leather.
is allowed to work into the finish, it can harm the
leather.
Never
use oils, varnishes, solvent-based or abrasive
1
Soiled leather should be cleaned immediately.
If
dirt
Cleaning the
Top
of
the Instrument Panel
Use only mild soap and water to clean the top surfaces
of the instrument panel. Sprays containing silicones or
waxes may cause annoying reflections in the windshield
and even make it difficult to see through the windshield
under certain conditions.
Keep belts clean and dry.
Glass
Glass should be cleaned often. GM Glass Cleaner (GM
Part
No.
1050427)
or a liquid household glass cleaner
will remove normal tobacco smoke and dust films.
Don’t use abrasive cleaners on glass, because they may
cause scratches. Avoid placing decals on the inside rear
window, since they may have to be scraped
off
later.
If
abrasive cleaners are used on the inside of the rear
window, an electric defogger element may be damaged.
Any temporary license should not be attached across the
defogger grid.
6-46
To Next Page
Loading...
