If
the belt stops before
it
reaches the buckle,
tilt
the
latch plate and keep pulling
until
you can buckle it.
Pull up on the latch plate to make sure
it
is
secure.
If
the belt
is
not long enough, see “Safety Belt
Extender” at the end of this section. Make sure the
release button on the buckle is positioned
so
you
would be able to unbuckle the safety belt quickly
if
you
ever had to.
3.
To
make the lap part tight, pull down on the buckle
end of the belt
as
you
pull
up
on
the shoulder part.
1-25
To Next Page
Loading...
