Securing a Child Restraint in
a
Rear
Outside Seat Position
You’ll
be using
the
lap-shoulder belt. See the earlier part
about
the
top strap
if
the
child restraint has one.
1.
Put the restraint on the seat. Follow the instructions
for
the
child restraint.
2.
Secure the child
in
the child restraint
as
the
instructions
say.
3. Pick up
the
latch plate. and run the lap and shoulder
portions
of
the vehicle’s safety belt through or
around the restraint. The child restraint instructions
will show
you how. Tilt the latch plate to ad-just the
belt
if
needed.
If
the shoulder belt goes
in
front
of
the
child’s face or
neck,
put
it
behind the child restraint.
4.
Buckle
the
belt.
Make
sure
the
release button
is
positioned
so
you would be able
to
unbuckle the
safety belt quickly
if
you
eves had
to.
1-34
To Next Page
Loading...
