1.
Make the belt as long
as
possible by tilting the latch
plate and pulling it along the belt.
4.
Run the vehicle’s safety belt through or around the
restraint. The child restraint instructions will show
you how.
2.
Put the restraint on the seat. Follow the instructions
for the child restraint.
3.
Secure the child in the child restraint as the
instructions say.
5.
Buckle the belt. Make sure the release button
is
positioned
so
you would be able to unbuckle the
safety belt quickly if you ever had to.
6.
To
tighten the belt, pull its free end while you push
down on the child restraint.
1-36
To Next Page
Loading...
