Programmable Automatic Door
Locks
Close your doors and
turn
on the ignition. Every time
you move your shift lever out of PARK (P) all of the
doors
will
lock. And, every time you stop and move
your shift lever into PARK (P). your doors will unlock.
If
someone needs to get out while you‘re not
in
PARK (P). have that person use the lnanual
or
power
lock. When the door
is
closed again,
it
will
not
lock
automatically. Just use the manual or power lock to lock
the door again. You can program the automatic door
lock feature to allow the doors to remain locked after
you
shift
into PARK (Pj.
1.
Close your doors and turn the ignition
ON.
2.
Keep your foot
on
the brake pedal.
3. Press and hold the driver’s power door lock switch.
4.
Move your shift lever out
of
PARK (Pj, then move
the
shift
lever back into PARK (Pj.
5.
Release the lock switch.
Your doors
will
now lock when you shift
out
of
PARK
(P),
and remain locked until you use the
manual or power door unlock switch.
To
reprogram the door locks
to
lock and unlock when
you shift
in
and
out
of
PARK (P) do the following:
1.
Close your doors and turn the ignition
ON.
2.
Keep your
foot
on the brake pedal.
3.
Press and hold the driver’s power door unlock
switch.
4.
Move the shift lever out of PARK (P),
then
move the
shift lever back into PARK
(P).
5.
Release the unlock switch.
Rear Door Security
Locks
Your Aurora
is
equipped with rear door security locks
that help prevent passengers from opening
the
rear
doors
of
your vehicle from
the
inside.
2-5
To Next Page
Loading...
