Ensure the shift lever is fully in PARK (P) range before
starting the engine. Your Aurora has a brake-transaxle
shift interlock. You have to fully
apply
your regular
brakes
before
you can shift from PARK (P) when the
ignition key is in the
ON position. If you cannot shift
out of PARK (P), ease pressure on the shift lever--push
the shift lever all the way into PARK (P) and also
release the shift lever button as you maintain brake
application. Then move the shift lever into the gear you
wish. (Press the shift lever button.) See “Shifting Out of
PARK (P)” in the Index.
REVERSE
(R):
Use this gear to back up.
NOTICE:
Shifting to REVERSE (R) while your vehicle is
moving forward could damage your transaxle.
Shift to REVERSE (R) only after your vehicle is
stopped.
To
rock your vehicle back and forth to get out of snow,
ice or sand without damaging your transaxle, see “If
You’re Stuck: In Sand, Mud,
Ice
or Snow” in the Index.
NEUTRAL (N):
In this position, your engine doesn’t
connect with the wheels.
To
restart when you’re
already moving, use NEUTRAL
(N)
only. Also, use
’
NEUTRAL
(N)
when your vehicle is being towed.
I
NOTICE:
Damage to your transaxle caused by shifting out
of PARK (P) or NEUTRAL
(N)
with the engine
racing isn’t covered by your warranty.
2-21
To Next Page
Loading...
