Cleaning Leather
Use a soft cloth with lukewarm water and a mild soap or
saddle soap and wipe
dry
with a soft cloth. Then, let the
leather
dry
naturally.
Do
not use heat to
dry.
0
For stubborn stains, use a leather cleaner. See your
0
Never
use
oils,
varnishes, solvent-based or abrasive
0
Soiled or stained leather should be cleaned
retailer for
this
product.
cleaners, furniture polish or shoe polish on leather.
immediately.
If
dirt
is allowed to work into the
finish, it can
harm
the leather.
Cleaning the Top
of
the Instrument Panel
Use only mild soap
and
water to clean the top surfaces
of the instrument panel. Sprays containing silicones or
waxes may cause annoying reflections in the windshield
and even make it difficult to see through the windshield
under certain conditions.
Cleaning Interior Plastic Components
Use only a mild soap and water solution on a soft
cloth or sponge. Commercial cleaners may affect the
surface finish.
Care of Safety Belts
Keep belts clean and
dry.
A
CAUTION:
Do
not bleach
or
dye safety belts.
If
you do, it
may severely weaken them.
In
a crash, they
might not be able to provide adequate protection.
Clean safety belts only with mild soap and
lukewarm water.
Cleaning Glass Surfaces
Glass should be cleaned often. GM Glass Cleaner (GM
Part
No.
1050427)
or a liquid household glass cleaner
will remove normal tobacco smoke
and
dust
fihs
on
interior glass.
Don’t use abrasive cleaners on glass, because they may
cause scratches. Avoid placing decals
on
the inside rear
window, since they may have to be scraped
off
later.
If
abrasive cleaners are used on the inside of the rear
window,
an
electric defogger element may be damaged.
Any
temporary license should not be attached across the
defogger grid.
To Next Page
Loading...
