EasyManua.ls Logo

Oldsmobile 1997 Cutlass - Page 139

Oldsmobile 1997 Cutlass
353 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Playing a Compact Disc
With the ignition
on,
insert a disc partway into the slot,
label side up. The player will pull it in and the disc
should begin playing.
The CD player will play either normal-size discs or the
smaller
8
cm discs with an adapter.
Note that when the disc is inserted, CD will be
displayed. When the disc is playing,
a
box will appear
around CD on the display.
If
you select a tone setting for
your CD, it will be activated each time you play a CD.
As
each new track starts to play, the track number will
appear in the display.
If
E
(error) and a number appear on the radio display
and the disc comes out,
it
could be that:
0
The road is too rough. The disc should play when the
The disc is dirty, scratched, wet or upside down.
0
The
air
is very humid.
If
so,
wait about an hour and
road is smoother.
try
again.
I€
any error occurs repeatedly or
if
an
error can't be
corrected, please contact your retailer.
If
your radio
displays an error number, write
it
down and provide it to
your retailer when reporting the problem.
REV
(1):
Press and hold this button to quickly reverse
within a track. You will hear sound at a reduced volume.
The display will show elapsed time.
FWD
(2):
Press and hold this button
to
quickly advance
within
a
track. You will hear sound at a reduced volume.
The display will show elapsed time.
RDM
(5):
Press this button to hear the tracks in random,
rather than sequential, order.
RDM
will appear on the
display when you press this button.
TONE:
Press this button to select a tone while playing
a
compact disc. The tone will be automatically set
whenever you play a compact disc.
SEEK:
Press, the down arrow to go to the start of the
current track if more than eight seconds have played.
Press the up arrow to go to the next track.
If
you hold
the button or press it more than once, the player will
continue moving rearward or forward through the disc.
SCAN:
Press this button to listen to each selection for a
few seconds. The disc will go to the next selection, stop
for a few seconds, then go on to the next selection. Press
this button again to stop scanning. The sound will mute
while scanning,
SCAN
will appear on the display and
the disc direction arrow will blink while scanning.
3-18

Table of Contents

Related product manuals