To tow your vehicle with all four wheels on the ground,
follow these steps:
7
---
1.
Position the vehicle to tow and then secure it.
2.
Turn the ignition switch to
OFF.
3.
Set the parking brake.
4.
Remove the following fuses from the left side
instrument panel fuse block:
A)
Radio, B) Wiper,
H)
Powertrain Control Module and
K)
Body
Function Control Module, Cluster. This will
prevent your battery
form
draining while towing.
See “Instrument Panel Fusle Block-Left” in
Section
6
for
location of the fuses.
5.
Turn the ignition switch
to
ACC.
6.
Shift your transaxle to NEUTRAL
(N).
7.
Release the parking brake.
Remember
to
replace the fuse once you reach
your
destination. To replace the fuse:
1.
Set the parking brake.
2.
Remove the key from the ignition switch.
3.
Replace the fuse.
I
NOTICE:
Make sure that the
towing
speed does
not
exceed
55
mph
(90
km/h),
or
your
vehicle could
be
badly damaged.
4-29
To Next Page
Loading...
