5-7
9. Now connect the black negative (-) cable to the good
battery’s negative (
-) terminal.
Don’t let the other end touch anything until the next
step. The other end of the negative (
-) cable doesn’t
go to the dead battery. It goes to a heavy, unpainted
metal part on the engine of the vehicle with the
dead battery.
10. Attach the cable at least 18 inches (45 cm) away
from the dead battery, but not near engine parts
that move. The electrical connection is just as good
there, but the chance of sparks getting back to the
battery is much less.
To Next Page
Loading...
