You can
-_
burned if you
sc-..
coolant on hot
engine parts. Coolant contains ethylene glycol
and it
will
burn if the engine parts are hot
enough. Don't spill coolant on a hot engine.
3.
After the engine cools, open the coolant air bleed
valves.
4.
Fill
the radiator with the proper
DEX-COOL@
coolant mixture, up to the base of the filler
neck. See
Engine Coolant on page
5-23
for more
information about the proper coolant mixture.
If
you see a stream of coolant coming from an
air bleed valve, close the valve. Otherwise,
ciose tne vaives aiier ine radiaior
is
iiiiea.
and the compartment.
5.
Rinse or wipe any spilled coolant from the engine
There are two bleed valves. One is located on the
thermostat housing. The other
is
located
OR
the
thermostat bypass tube.
5-35
To Next Page
Loading...
