1-4
Memory Seat and Mirrors (If Equipped)
If your vehicle has this
feature, the controls on
the driver’s door panel
are used to program and
recall previous settings.
You can use this feature to save your driver’s seat
position, lumbar adjustment, outside mirror positions,
personalization features, comfort controls and
radio settings.
Adjust the driver’s seat (including the lumbar
adjustments) and both outside mirrors to the position
you would like for driving. Then press and hold memory
button 1 for more than three seconds. A double beep
will sound when the memory is set.
To set the seat and mirror positions for a second driver,
follow the previous steps, but press button 2 instead.
You can also store an exit position for each driver. The
exit position is programmed by moving the seat to the
desired exit position and then holding the exit button for
more than three seconds. The exit position set will be for
the most recently selected driving position (1 or 2).
Please note that mirror and lumbar positions will not be
stored or recalled for the exit position.
To Next Page
Loading...
