1.
Park the vehicle on a level surface. You can
remove the coolant surge tank pressure cap
when the cooling system, including the coolant
surge tank pressure cap and upper radiator hose,
is
no longer hot. Turn the pressure cap slowly
counterclockwise (left) about one-quarter turn and
tnen stop.
If you hear a hiss, wait for that to stop.
A
hiss
means there
is
still some pressure left.
2.
Then keep turning the
pressure cap slowly,
and remove
it.
3.
Then
fill
the coolant
surge tank with the
proper mixture, to the
FULL
COLD
fill
mark line
(4.5
inches
(1
1
cm) from the top of
the filler neck).
5-35
To Next Page
Loading...
