4.
With the coolant surge tank pressure cap off, start
the engine and let
it
run until you can feel the upper
radiator hose getting hot. Watch out for the
engine cooling fans.
By this time, the coolant level inside the coolant
surge tank may be lower.
If
the level is lower, add
more of the proper mixture to the coolant surge
tank until the level reaches about
4.5
inches
(1
1
cm) from the top of the filler neck.
5.
Then replace the pressure cap. Be sure the arrow
on the pressure cap lines up like this.
5-36
To Next Page
Loading...
