Front Turn Signal and Parking
Lamps
Once the headlamp assembly has been removed from
the vehicle, the front turn signal and parking lamps
can be accessed. See
Headlamps
on
page
5-55
for more information on location.
1.
Tip the headlamp assembly and while pressing the
release, turn the bulb and socket counterclockwise
to remove them.
2.
Replace the bulb in the socket.
3.
Then reconnect the socket wiring harness to the
4. Reinstall the headlamp assembly into the vehicle.
lamp assembly.
5-57
To Next Page
Loading...
