Don’t include the compact spare tire in your tire rotation.
After the tires have been rotated, adjust the front and
rear inflation pressures as shown on the Tire-Loading
Information label.
Reset the Check Tire Pressure System. See
Check Tire
Pressure System on page
5-62.
Make certain that all wheel nuts are properly tightened.
See Wheel Nut Torque in
Capacities and Specifications
on page
5-
100.
I
1
Rust
or dirt on a wheel, or on the parts to
which
it
is fastened, can make wheel nuts
become loose after a time. The wheel could
come
off
and cause an accident.
When
you
change a wheel, remove any rust or dirt from
places where the wheel attaches to the vehicle
In an emergency, you can use a cloth or a
paper towel to do this; but be sure to use a
scraper or wire brush later,
if
you need to, to
get all the rust or dirt
off.
See “Changing a Flal
Tire” in the Index.
5-64
To Next Page
Loading...
