Matching Transmitter(s) To Your Vehicle
Each key chain transmitter is coded to prevent another
transmitter from unlocking your vehicle.
If
a transmitter is
lost
or stolen, a replacement can be purchased through
your retailer. Remember to bring any remaining
transmitters
with
you when you
go
to your retailer. When
the retailer matches the replacement transmitter to your
vehicle, any remaining transmitters must also be matched.
Once your retailer has coded the new transmitter, the lost
transmitter will not unlock your vehicle. Each vehicle can
have only two tr'msmitters matched to it.
Battery Replacement
Under normal use, the battery
in
your key chain
transmitter should last about two years.
You can tell the battery is weak if the transmitter won't
work at the normal range in any location.
If
you have
to
get
close
to
your vehicle before the transmitter works,
it's probably time to change the battery.
To
replace the battery
in
the Keyless Entry transmitter:
1.
Insert a dime in the slot between the covers
of
the
transmitter housing near the key ring hole. Remove
the bottom by twisting the dime.
2. Remove and replace the battery
with
a three volt
NOTICE:
CR2032 or equivalent battery, positive
(+)
side down.
3.
Align the covers and snap them together.
When replacing the battery, use care not to touch any
of the circuitry. Static from your body transferred to
4.
Check the operation
of
the transmitter.
these surfaces may damage the transmitter.
2-7
To Next Page
Loading...
