i,
DGlCO-l0C
SI
)
AM/FM
Stereo with Compact Disc
Player
The digital display indicates information
on time or radio station frequency, the
AM
or FM radio band, whether the
station
is
in
stereo, and other radio
functions.
POWER:
Press to turn the unit on and
off
when the ignition is on.
VOL (Volume):
Adjusts the volume
up or down, and the bottom of the
digital screen displays the setting. For a
normal listening level preset at the
factory, press the center of the switch.
TUNE:
Press this switch to tune in
higher frequencies and lower
frequencies.
SEEK:
Press to tune automatically to
the next station higher on the band.
BAL (Balance):
Adjusts the lefthight
and fronthear speaker balance to your
individual taste. When you change
either adjustment, the bottom of the
digital screen
will
display the point of
balance you have selected.
For
the
normal setting preset at the factory,
press the left and right or front and rear
buttons at the same time.
SCAN:
Press to listen for a few
seconds to the next station on the AM
or
FM
band; the scan will continue
every few seconds until you press
SCAN
again to stop on a particular
station.
RCL (Recall):
Press to change
between the clock and the radio station
frequency displayed on the digital
screen.
AM/FM:
Press to switch between the
AM and
FM
bands.
129
To Next Page
Loading...
