Seats
&
Restraint Systems
28
Center Passenger Position
lap
Belt
[f
your vehicle has a bench seat,
someone can sit in the center position.
When you sit in a center seating
position, you have a lap safety belt,
which has no retractor.
To
make the belt longer, tilt the latch
plate and pull it along the belt.
To
make the belt shorter, pull its free
end as shown until the belt is snug.
Buckle, position and release it the same
way as the lap part of a lap-shoulder
belt. If the belt isn’t long enough, see
Safety
Belt
Extender
at the end of this
section.
Make sure the release button on the
buckle is positioned
so
you would be
able to unbuckle the safety belt quickly
if you ever had to.
To Next Page
Loading...
