Olimpia splendid CALDO SKY - Minimum Power Heating; Maximum Power Heating; ECO Mode

CALDO SKY
EN - 19
ENGLISH
9.5 - Switching off delay mode
Press button when the appliance is functioning to activate and set the switching
off delay mode; the TIMER LED on the appliance display turns on and the value
is shown.
Press the button once or more to set the desired delay (from 1 to 8 hours) after
which the unit will turn off.
Wait approximately 5 seconds without pressing any button: the delay will be set and the
TIMER LED will turn on on the display.
After conrming the activation of the timer, it is possible to change the functioning mode
at any moment by pressing button . Once the set time has passed, the unit will turn
off.
To cancel the delayed switching off, press button and the unit will switch to stand-
by mode or, as an alternatively, repeat the setting procedure of the delay, entering the
value .
It is possible to set the desired delay until the hours numeric sym-
bol ashes. Once setting is over, after 5 seconds, the numeric val-
ue stop ashing and it is automatically memorized. Is it’s desired
to further change the delay time, it’s necessary to repeat the oper-
ation from the beginning.
The weekly timer and this function can be set at the same time.
9.6 - Flap functioning
When the appliance is on, pressing button will cause the ap to start oscillating.
If it is desired to stop the ap in a certain position to direct the air ow, press button
again when the ap is oriented as desired.
Press the button one more time to start the ap oscillation again.
9.7 - Weekly Timer mode
This function can only be activated through the app.