Olimpia splendid Unico Twin - Wall Unit Operating Modes; Spa, Cooling, and Dehumidification Modes; Ventilation and Heating Modes

ENGLISH
EN - 38
6.4.2 - OPERATION IN “SPA” MODE ONLY (AUTOMATIC)
• Inthismode,themachine’stemperatureisautomaticallyregulatedaccordingtotheroom’stemperature.
Thefanspeedisalsoautomaticallyregulatedaccordingtothesettemperature(exceptindehumidication
mode).
• Toactivatethismode,pressseveraltimeskeyB5 on the remote control until when symbol D5 appears
on the display.
In this mode, the appliance automatically sets the mode of operation (cooling, ventilation or heating, if
applicable), the system temperature and ventilation speed.
6.4.3 - OPERATION IN “COOLING” MODE ONLY
• Whenusedinthismode,theairconditionerdehumidiesandcoolstheroom.
• Toactivatethismode,pressseveraltimesthekeyB5 on the remote control until when the symbol D2
appears on its display.
• Inthisrunmode,therequiredtemperatureandfanspeedcanbeset.
After three minutes (maximum time) from the activation of this mode of operation, the appliance starts
supplying cold air.
6.4.4 - OPERATION IN “DEHUMIDIFICATION” MODE ONLY
• Whenusedinthismode,theairconditionereliminatesthehumidityintheroom.
This function can be extremely useful between seasons, particularly on rainy days when the temperature
is not uncomfortable but the excess humidity feels unpleasant.
• Inthismode,bothroomtemperatureandfanspeedsettingsareignored,whichcorrespondtominimum.
• Anyfantemperatureandspeedindicationthendisappearsfromthedisplay(LED6)ofthecontrolpanel
(g.F).
• PressseveraltimeskeyB5 on the remote until when symbol D3 and the symbol of minimum ventilation
D18 appear on its display to activate this mode.
• Inthisoperatingmodeitisnormalfortheairconditionertofunctionintermittently.
6.4.5 - OPERATION IN “VENTILATION” MODE ONLY
• Whenusedinthismodetheairconditionerdoesnotperformanyactionwithregardtotemperatureand
air humidity in the room.
• PressseveraltimeskeyB5 on the remote until when the symbol of minimum ventilation D18 appears on
its display to activate this mode.
In this mode it is possible to select the maximum, medium and minimum speed of the fan.
6.4.6 - OPERATION IN “HEATING” MODE ONLY
• Usingthismode,theapplianceheatstheroom.
• Toactivatethismode,pressseveraltimeskeyB5 on the remote control until when symbol D1 appears
on its display.
• Inthisrunmode,therequiredtemperatureandfanspeedcanbeset.After three minutes (maximum time)
from the activation of this mode of operation, the appliance starts supplying heat.